motorized reader and encoder
AS-1 Anti-skimming modules for manual card reader
|
|
Skimming is a technique by which criminals collect data from a card using skimming modules, such as pre-fixed reading modules and cameras, in order to use this data for their own criminal purposes.
In the banking sector, anti-skimming modules, which detect the manipulation of a device and cancel the reading process, have been implemented for some time.
In 2013, 25 353 attacks were reported worldwide. These caused damages in excess of € 248 million.
Access controls to sensitive areas and residential facilities are increasingly becoming targets of skimmers.
Up until now, mainly only banking terminals and SSV have been protected for cost reasons. With the AS1, Transmac now offers an inexpensive anti-skimming module that can be used in manual reading systems and which also provides security against skimmer attacks for access control systems.
|
 |
The AS1 anti-skimming module is resistant to:
• light
• humidity and extreme temperatures
• electrostatic interactions
• darkness
The AS1 anti-skimming module cannot be detected by the naked eye.
Optional accessories:
• button head with external thread (other dimensions/lengths on request) |
|
|
| TOP |
|
KYT-3000 Series
|
|
| Model |
motorized card reader and encoder |
 |
| Function |
magnetic card read + write (HiCo + LoCo),
chip card T=0 T=1, RF-Cards ISO14443A Mifare 1K
|
| Bezel |
optional short bezel |
Shutter
|
optional
|
| Dimension |
117,7mm x 112,0mm x 183,5mm (w/o shutter)
4.63” x 4,41” x 7.22” (w/o shutter) |
| Interface |
RS-232 (KYT) , RS-422 (KYS) , TTL (KYL) USB (KYU) |
| Certification |
EMV level1 4.0 certified |
| Specifics |
12 Volt version available (only magnetic- and RF – card operation)
magnetic R+W head for 3 Millionen card operation (optional)
HiCo/LoCo selectabel by software (optional) |
|
|
Top
|
|
KST-3000 Series
|
|
| Model |
compact motorized card reader and encoder |
 |
| Function |
magnetic card read only
chip card T=0 T=1 + memory cards, r+w
RF-Cards ISO14443A Mifare 1K r+w |
| Bezel |
optional
|
Shutter
|
optional
|
| Dimension |
132mm x 85mm x 44mm 5.2“ x |
| Interface |
USB, RS-232
|
|
|
|
|
|
|
| Top |
|
TBM-5000
|
|
| Model |
compact motorized card reader and encoder |
 |
| Function |
magnetic card read only
chip card T=0 T=1 + memory cards, r+w
RF-Cards ISO14443A Mifare r+w |
| Bezel |
Slim bezel
|
Shutter
|
optional
|
| Dimension |
158mm x 92mm x 58mm |
| Interface |
TTL, RS-232
|
|
|
|
|
|
|
| Top |
|
KYT-6000 Series
|
|
| Model |
motorized card reader and encoder |
 |
| Function |
magnetic card read + write (HiCo + LoCo),
chip card T=0 T=1, RF-Cards ISO14443A Mifare 1K |
| Cabinet |
white |
| Power Supply |
internal P/S optional with power kack for external P/S |
| Dimension |
140 mm x 250 mm x 120 mm 5.5” x 9.8” x 4.7“ |
| Interface |
RS-232, RS422, USB, Ethernet |
|
|
|
|
|
|
| Top |
|
KYT-1100 Series
|
|
| Model |
motorized card reader and encoder |
 |
| Function |
RF-cards ISO 14443A Mifare 1K, 4K. ISO15693 (KYT-1901) |
| Bezel |
optional
|
Shutter
|
optional
|
| Dimension |
135mm x 96,6mm x 108,2mm 5.3“ x 3.8“ x 4.3“ |
| Interface |
RS-232 (KYT) , RS-422 (KYS) , TTL (KYL) |
| Specifics |
error card capture function (card dropped below the system) |
| Top |
|
KYT-1000 Series
|
|
| Model |
motorized card feeding module |
 |
| Bezel |
optional
|
Shutter
|
optional
|
| Dimension |
135mm x 96,6mm x 108,2mm 5.3“ x 3.8“ x 4.3“ |
| Interface |
RS-232 (KYT) , RS-422 (KYS) , TTL (KYL) |
Specifics |
error card capture function (card dropped below the system) |
|
|
| Top |
|
KYP-6000 Series
|
|
| Model |
motorized RF card reader and encoder + TRW printer |
 |
| Function |
RF Mifare 1K |
Printer
|
Thermal Rewritable Printer (TRW)
|
Resolution
|
200 dpi or 300 dpi text + graphic |
| Dimension |
176.4mm x 122.8mm x 144mm 6.83” x 4.83” x 5.67“ |
| Interface |
RS-232 (200 + 300 dpi), USB (200-300 dpi) |
| Certification |
|
| Specifics |
TRW printer – 500 x printing and erasing and re-printing on each card. |
|
|
| Top |
|
KYP-1000 Series
|
|
| Model |
motorized RF card reader and encoder + TRW printer |
 |
| Function |
RF Mifare 1K and/or Themo RW printing (TRW cards) |
| Bezel |
optional
|
Shutter
|
optional
|
| Dimension |
158,7mm x 144mm x 122,8mm |
| Interface |
RS-232 (200-300 dpi), USB (200-300 dpi) |
| Specifics |
TRW printer – 500 x printing and erasing and re-printing on each card.
Error card capture function, rear drop function. |
|
|
| Top |
|
|
